TU-872 SLK PCB Laminate - Yepamusoro-Speed ​​Low Loss Material | Highleap

Highleap Electronics inopa TU-872 SLK laminates kune yakaderera-kurasikirwa, yakakwirira-kumhanya PCB maapplication mu telecom, server, microwave, uye RF masisitimu. IPC-4101/126 yakasimbiswa.

TUC PCB

TU-872 SLK Laminate - Yakaderera Kurasikirwa Material yeYakakwira-Speed ​​uye High-Frequency PCBs

TU-872 SLK ndeyepamusoro-inoshanda yakagadziridzwa epoxy FR-4 laminate, yakanyatso gadziridzwa kurasikirwa kwakaderera uye kuvimbika kwakanyanya mumultilayer high-speed circuit board application. Yakasimbiswa neE-girazi uye inoenderana neyakajairwa FR-4 kugadzirisa, inogonesa kugadzikana kushanda kwemagetsi paGHz-level frequency.

Iine dielectric inogara iri pazasi 4.0 uye dissipation chinhu pasi pe0.009 pa10GHz, TU-872 SLK yakanakira:

  • High-speed backplanes

  • RF uye microwave transceivers

  • Base zviteshi uye telecom routers

  • Kuchengetedza, server uye HPC zvikumbiro

Nekuda kwekusimba kwayo kwakawedzera kupisa (Tg > 200 ° C, Td > 340 ° C), CAF kuramba, uye flat Z-axis kuwedzera, TU-872 SLK inosangana nezvinodiwa zvemazuva ano epamberi HDI uye inotungamira-isina reflow magadzirirwo.

Mamiriro ehunyanzvi eTU-872 SLK Laminate

pfuma Kukosha kwechimiro Mamiriro Emuedzo IPC-4101 /126 Zvinodiwa
Thermal Properties
Tg (DMA) 220 ° C E-2/105 > 170 ° C
Tg (DSC) 200 ° C E-2/105 -
Tg (TMA) 190 ° C E-2/105 -
Td (TGA) 340 ° C E-2/105 > 340 ° C
CTE x-axis 12–15 ppm/°C E-2/105 -
CTE y-axis 12–15 ppm/°C E-2/105 -
CTE z-axis 2.3% E-2/105 <3.0%
Thermal Stress – 288°C Solder Float > 60 sec A > 10 sec
T260 60 Maminitsi E-2/105 > 30 min
T288 20 Maminitsi E-2/105 > 15 min
T300 5 Maminitsi E-2/105 > 2 min
Kupisa 94V-0 E-24/125 94V-0
Zvigadzirwa Zvemagetsi
Mvumo @ 1GHz 4.0 / 3.8 SPC / 4291B <5.2
Mvumo @ 5GHz 3.9 SPC -
Mvumo @ 10GHz 3.8 SPC -
Dissipation Factor @ 1GHz 0.008 / 0.006 SPC / 4291B <0.035
Dissipation Factor @ 5GHz 0.008 SPC -
Dissipation Factor @ 10GHz 0.009 SPC -
Kusagadzikana kweVolume > 1010 MΩ·cm C-96/35/90 > 106 MΩ·cm
Kumusoro Kugadziriswa > 108 MΩ C-96/35/90 > 104 MΩ
Electric Strength > 40 kV/mm A > 30 kV/mm
Dielectric Kuparara > 50 kV A -
Mechanical Properties
Young's Modulus – Warp 26 GPA A -
Young's Modulus – Zadza 24 GPA A -
Flexural Strength – Kureba > 60,000 psi A > 60,000 psi
Flexural Strength – Crosswise > 50,000 psi A > 50,000 psi
Simba rePeel - 1 oz RTF Cu 4–7 lb/in A > 4 lb/in
Kubvisa Mvura 0.13% E-1/105 + D-24/23 <0.5%

CHERECHEDZA

  • Yese data yehunyanzvi inoratidzwa pamusoro yakavakirwa pamagwaro anowanikwa pachena kubva kuTaiwan Union Technology Corporation (TUC). Aya makoshero anoitirwa kutariswa chete uye anogona kusiyana zvichienderana nechaiwo maapplication kana mamiriro ekugadzirisa. Izvo hazvina kuvimbiswa zvakatemwa.
  • TU-872 SLK inogadzirwa neTUC ichishandisa tekinoroji-inomirira tekinoroji kusangana nekuvimbika kwepamusoro zvinodiwa zveRF yepamusoro uye yakakwirira-kumhanya dhizaini. Kuti uwane ruzivo rwakadzama rwekuita kwezvinhu, nhungamiro yekugadzirisa, kana mibvunzo yekuenderana, ndapota taura neTaiwan Union Technology Corporation zvakananga.
  • KuHighleap Electronics, isu tiri nyanzvi yekugadzira PCB nekugadzira fekitori ine ruzivo mukushanda neTU-872 SLK uye mamwe marefu-frequency laminates. Kana iwe uchida nhungamiro yekusarudza zvinhu, PCB stack-up kubvunza, kana turnkey yekugadzira uye masevhisi egungano, timu yedu yeinjiniya iri pano kuti ikubatsire.

Ndokumbira unzwe wakasununguka kutibata nesu kuti tibvunze tekinoroji, yakazara madheti, kana tsika quote yakarongedzerwa kune yako chaiyo dhizaini zvido.

Material Benefits & Processing Compatibility

TU-872 SLK inopa chiyero chekuita uye kugadzira. Iyo inoenderana zvizere neyakajairwa FR-4 lamination uye etching maitirwo, uku ichiendesa yepamusoro kuita kwepamusoro-frequency uye thermally inoda madhizaini.

Zvinhu zvinokosha zvinosanganisira:

  • Certified kune IPC-4101E / 29, / 99, / 101, uye / 126 zviyero

  • UL inozivikanwa (Faira: E189572) ine 94V-0 chiyero chekupisa

  • Yakavandudzwa CTE, CAF kuramba, uye kugadzikana kwemwando

  • Yakanakisa peel simba uye kuburikidza-gomba kuvimbika

  • Inowanikwa mumhando dzakasiyana dze copper cladding (1/3 oz - 5 oz) uye prepreg masitaera

Shandisa TU-872 SLK paunenge uchida:

  • Iyo yekudonha-mu FR-4 imwe nzira ine yakakwirira yemagetsi kuita

  • IPC-yakasimbiswa kuvimbika kwekumashure kana HDI stackups

  • Consistent dielectric performance inosvika 10GHz

TAURA NESU
Turnkey-PCB-Assembly-Fekitori

Kugadzira & Kugadzira PCB yeTU-872 SLK Projects

Highleap Electronics inopa mabasa ekugadzira maPCB uye kugadzira maPCB kumapurojekiti ane chekuita neTU-872 SLK, kubva pakugadzira ma prototype kusvika pakugadzira zvinhu zvakawanda. Kugadzira kunoitwa zvichienderana nekugadzirwa kwePCB kwakatenderwa, kuunganidzwa kwezvinhu, zvinodiwa nezvinhu, uye magwaro ekugadzira.

Mapoka edu einjiniya nekugadzira anoronga kugadzirwa kwebhodhi risina chinhu nezvinodiwa pakugadzira kuti PCB yese irambe yakavakwa zvinoenderana kubva pakuongorora dhizaini kusvika pakuongorora kwekupedzisira nekuyedza.

  • Kugadzirwa kwePCB dzakawanda uye kugadziriswa kweimpedance inodzorwa
  • DFM, PCB stack-up, uye ongororo yekugona kugadzira
  • Kuungana kweSMT/THT uye kuwanikwa kwezvikamu
  • AOI, X-ray, kuyedzwa kwemagetsi, uye kuyedzwa kwePCBA kunoshanda
  • Rutsigiro rwekugadzira, diki-batch, uye huwandu

Ko purojekiti yeTU-872 SLK PCB yakagadzirira kugadzirwa here? Titumirei mafaira enyu eGerber, zvinhu zvakaunganidzwa, BOM, uye zvinodiwa pakugadzira kuti muongorore uye mukodhese mainjiniya.

Bata Highleap Electronics kuti mukurukure nezvezvinodiwa pakugadzira maPCB uye pakugadzira maPCB.

Tora Quick Quote

Ziva kuti hunyanzvi hwedu hunogona kubatsira sei nePCB yako inotevera chirongwa.

TAURA NESU