Din PCB Manufacturing Expert – Highleap Electronic

IT-958G PCB for High Speed Servers and Backplanes

IT-958G PCB for High Speed Servers and Backplanes

IT-958G multilayer PCB examples for server and high-speed interconnect applications.For a server backplane or high-speed networking board, choosing a low-loss laminate is only the start: insertion loss also depends on copper profile, trace geometry, vias, connectors...

IT-968GSE printkort til højhastighedsnetværk

IT-968GSE printkort til højhastighedsnetværk

IT-968GSE PCB illustration for ultra-low-loss switch and telecom board planning.400G-class switch cards and high-speed telecom boards can be sensitive to small differences in dielectric constant, copper roughness and via transitions. IT-968GSE is an ultra-low-loss...

Bygning af IT-602G HDI-kort til SSD'er og hukommelsesmoduler

Bygning af IT-602G HDI-kort til SSD'er og hukommelsesmoduler

IT-602G PCB examples for HDI, SSD and memory-module applications.An IT-602G PCB is typically considered when an HDI or memory-module design needs a halogen-free, high-Tg laminate with low dielectric loss and controlled Z-axis expansion. Those properties are relevant...

IT-988GL bagplansprintkort med lav-CTE-processtyring

IT-988GL bagplansprintkort med lav-CTE-processtyring

IT-988GL multilayer PCB manufacturing illustration.Long-reach backplanes and high-speed switch boards place simultaneous demands on dielectric loss, dimensional stability and mechanical interfaces such as press-fit connectors and large BGAs. IT-988GL is an ITEQ...

Arlon 85NT PCB: Polyimidfremstilling og SMT-kontrol

Arlon 85NT PCB: Polyimidfremstilling og SMT-kontrol

PCB manufacturing illustration; material grade and construction are confirmed in the project specification.A high-temperature polyimide PCB laminate with nonwoven aramid reinforcement is used when thermal stability and low in-plane expansion are both important. Arlon...

Højkvalitets Arlon 33N printkortproduktion

Højkvalitets Arlon 33N printkortproduktion

PCB manufacturing illustration. Confirm the specified Arlon material grade through the project documentation and material traceability.An Arlon 33N PCB is usually specified because a design needs both a polyimide thermal-performance profile and a clearly defined...

Arlon 35N PCB-fremstilling og polyimidlaminering

Arlon 35N PCB-fremstilling og polyimidlaminering

PCB manufacturing illustration. Confirm the specified Arlon material grade through the project documentation and material traceability.Arlon 35N PCB fabrication is a process-window problem: how to produce a repeatable polyimide multilayer through material preparation,...

Lav-CTE Arlon 45NK printkortfremstilling i Kina

Lav-CTE Arlon 45NK printkortfremstilling i Kina

Illustration af printkortproduktion. Bekræft den specificerede Arlon-materialekvalitet gennem projektdokumentationen og materialesporbarhed. Arlon 45NK printkortdesign handler om at kontrollere ekspansionsmismatch ved lodde-forbindelsesgrænsefladen, samtidig med at fremstillingsevnen bevares...

Arlon 85NT PCB: Polyimidfremstilling og SMT-kontrol

Arlon 85HP PCB-produktionstjenester i Kina

Illustration af printkortproduktion. Bekræft den specificerede Arlon-materialekvalitet gennem projektdokumentationen og materialesporbarhed. Arlon 85HP printkortproduktion er mest relevant, når et tykt printkort med et højt lagtal eller termisk belastet printkort kræver omhyggelig kontrol...

Arlon 86HP HDI PCB-produktion

Arlon 86HP HDI PCB-produktion

Illustration af printkortfremstilling. Bekræft den specificerede Arlon-materialekvalitet gennem projektdokumentationen og materialesporbarhed. Arlon 86HP printkortfremstilling er primært en beslutning om stack-up og sammenkoblingspålidelighed, ikke en anmodning om et materiale med høj Tg fra...