Ukukhiqizwa Nokuhlanganiswa kwe-PCB Evame Kakhulu ye-TLY-5

I-Highleap Electronics inikeza ukukhiqizwa nokuhlanganiswa kwe-TLY-5 PCB yemiklamo ye-RF, i-microwave, i-radar kanye ne-mmWave kusetshenziswa izinqubo zokwenziwa kwe-PCB ezilawulwayo ezivame kakhulu.

I-PTFE PCB

Kuyini i-TLY-5?

I-TLY-5 iyi-PTFE laminate eqiniswe ngengilazi elukiwe enikezwa yi-AGC njengamanje ukuze isetshenziswe kuma-frequency aphezulu kanye nezinhlelo zokusebenza zesekethe ye-microwave. Le nto ihlanganisa i-dielectric constant ephansi kanye ne-dissipation factor ephansi kakhulu, okwenza ifaneleke emiklamo ye-PCB lapho ukulahlekelwa kokudlulisela, ukuziphatha kwe-impedance, kanye nokusebenza kwe-RF kuyizinto ezibalulekile okufanele uzicabangele.

I-Highleap Electronics ikhiqiza futhi ihlanganise ama-PCB amaphrojekthi achaza i-TLY-5. Indima yethu ukwenziwa kwe-PCB kanye nokukhiqizwa kwe-PCBA kunokukhiqiza i-laminate, ngokunaka kobunjiniyela kugxile ekuqoqweni, i-geometry ye-RF, ukubhoboza, ukubopha, ukuqeda ubuso, kanye nezidingo zokuhlanganiswa kwebhodi eliqediwe.

Uhlolojikelele Lwempahla

  • Umkhiqizi Wamanje: AGC
  • Umkhiqizo: TLY-5
  • Umndeni Wezinto Ezibonakalayo: I-PTFE Elukiwe-Ingilazi Eqinisiwe
  • I-Dk evamile @ 10 GHz: 2.20 ± 0.02
  • I-Df evamile @ 10 GHz: 0.0009
  • Yakhelwe Izinhlelo Zokusebenza ze-PCB Ezivame Kakhulu

Izici Ezihlobene ne-PCB

  • Ukulahlekelwa Okuphansi Kakhulu Kwe-Dielectric
  • I-Low Dielectric Constant
  • Ukumuncwa Umswakama Ophansi
  • Ukuqinisa Okukhulu Kwengilazi Elukiwe
  • Ifanelekela i-Microwave kanye ne-mmWave Circuits
  • Itholakala ngobukhulu obuningi be-Laminate

    Izakhiwo Zobuchwepheshe ze-TLY-5 Zereferensi Yobunjiniyela be-PCB

    Amanani alandelayo afingqa izakhiwo ze-TLY-5 ezikhethiwe ezihlobene nomklamo kanye nokwakhiwa kwe-PCB evame kakhulu. Angamanani okubhekisela ezintweni ezibonakalayo kunokuba abe yizincazelo zama-PCB e-Highleap aqediwe.

    Property Value ejwayelekile Unit Indlela Yokuhlola
    I-Dielectric Constant (Dk) @ 10 GHz I-2.20 ± 0.02 - IPC-650 2.5.5.5
    Isici Sokushabalalisa (Df) @ 10 GHz 0.0009 - IPC-650 2.5.5.5
    Ukuqhuba Ukushisa 0.22 W/m·K I-ASTM F433
    I-CTE X / Y / Z (25–260°C) 26 / 15 / 217 ppm/°C I-ASTM D3386 (TMA)
    Ukumuncwa komswakama 0.02 % IPC-650 2.6.2.1
    Ukumelana Nomthamo 1 × 1010 MΩ·cm IPC-650 2.5.17.1
    Ukuphinda Usungulwe 1 × 108 MΩ IPC-650 2.5.17.1
    Ubuningi 2.19 g/cm³ I-ASTM D792
    Ukuvutha I-V-0 Isilinganiso I-X 94

    Amazwi

    1. Amanani angenhla ayidatha ejwayelekile yokubhekisela kwezinto ezibonakalayo futhi akufanele ahunyushwe njengemininingwane eqinisekisiwe yama-PCB aqediwe.
    2. Imiphumela kagesi neyemishini ingancika ekujiyeni kwe-laminate, ukwakhiwa kwethusi, izimo zokucubungula, kanye nendlela yokuhlola.
    3. I-TLY-5 okwamanje inikezwa yi-AGC. Bheka imibhalo yobuchwepheshe yakamuva yomkhiqizi wezinto ezibonakalayo ukuze uthole imininingwane yamanje, ubukhulu obutholakalayo, izinketho zethusi, kanye nolwazi lokufaneleka.

    Izinhlelo ze-TLY-5 PCB ku-RF, Microwave, Radar kanye Nezinhlelo Zokuxhumana

    Ama-PCB e-TLY-5 acatshangelwa kakhulu ama-RF, ama-microwave, kanye nama-millimeter-wave electronics lapho ukulahleka kwe-dielectric kanye nokuziphatha komugqa wokudlulisela kuyizingxenye ezibalulekile zomklamo wesekethe. Izinto ezibonakalayo okwamanje zinikezwa yi-AGC futhi zisetshenziswa ezinhlelweni zokusebenza ezivame kakhulu kusukela ku-radar yezimoto kanye nehadiwe yokuxhumana kuya kumasekethe e-aerospace kanye nama-microwave front-end.

    Kulezi zinhlelo zokusebenza, i-laminate iyisici esisodwa kuphela sendlela yesignali ye-RF. I-PCB eqediwe incike futhi ku-geometry yomugqa wokudlulisela, ubukhulu be-dielectric, iphrofayili yethusi, izici ezifakwe ipulasitiki, izakhiwo zomhlabathi, izixhumi, izinguquko, kanye nokuphela kwendawo. Lezi zici kufanele zihlolwe ndawonye lapho kuguqulwa umklamo we-RF ube yi-PCB ekhiqizwayo.

    • Ama-PCB e-Radar Yezimoto:
      I-TLY-5 ingacatshangelwa kumasekethe e-radar asebenza cishe ku-77 GHz kanye neminye imvamisa yamagagasi angama-millimeter. Ukwenziwa kwe-PCB yale miklamo kudinga ukunakwa kakhulu kwe-geometry yokulandelela i-RF, izici zomqhubi, ukubhaliswa, kanye nokushintshana phakathi kwemigqa yokudlulisela kanye nezingxenye.
    • Ukuxhumana Kwesathelayithi Neselula:
      Imishini yokuxhumana evame kakhulu ingasebenzisa i-TLY-5 kuma-antenna feeds, amanethiwekhi okusabalalisa e-RF, izingxenye zokudlulisela kanye nezamukeli, kanye nezifunda ze-microwave ezihlobene lapho ukulahleka okuphansi kwe-dielectric kuyingxenye yesidingo sikagesi.
    • Ama-PCB e-RF Power Amplifier:
      Amasekethe e-Power-amplifier ahlanganisa izidingo zokudlulisa i-RF nezinto ezicatshangelwayo zezingxenye, isisekelo, ithusi, kanye nokwakheka kokushisa. Ngakho-ke ukwakhiwa kwe-PCB yokugcina kufanele kuthuthukiswe ngokuphathelene nokucaciswa kwe-laminate kanye nomklamo ophelele we-amplifier.
    • Amasekethe E-LNB, LNA kanye ne-Microwave Front-End:
      Izinhlangano ezinomsindo ophansi kanye nokuguqulwa kwemvamisa zivame ukuqukatha izindlela ze-RF ezimfushane, ezizwela ukuvimba. Imigqa yokudlulisa elawulwayo, ngokubeka, izakhiwo zokusekela, ukuguqulwa kwezingxenye, kanye nezindawo zokuhlangana zenhlangano kuba yizinto ezibalulekile ezicatshangelwayo ekukhiqizeni.
    • Imiklamo ye-PCB ye-Ka-, E- kanye ne-W-Band:
      Emazameni aphezulu e-microwave kanye namagagasi e-millimeter, izinguquko ezincane kakhulu ku-geometry ye-PCB zingaba zibaluleke kakhulu. Imidwebo yokwenziwa kufanele ichaze ngokucacile i-stack-up edingekayo, ukwakheka kwethusi, ubukhulu obubalulekile, kanye nezici ze-RF.
    • I-Aerospace RF Electronics:
      I-TLY-5 ingachazwa futhi ngokuxhumana kwezindiza, i-antenna, kanye ne-RF electronic assembly. Izidingo zangempela ze-PCB zincike ekwakhiweni kwemishini, indawo yokusebenza, ukwakhiwa kwemishini, kanye nezidingo zeziqu ezifanele.

    I-Highleap Electronics inikeza izinsizakalo zokukhiqiza i-TLY-5 PCB kanye nokuhlanganiswa kwe-PCB kumaphrojekthi e-RF, i-microwave, i-millimeter-wave, i-radar, i-antenna, kanye nokuxhumana. Sikhiqiza kusukela kumadokhumenti e-PCB akhishwe, okuhlanganisa ibanga lezinto ezivunyiwe, i-stack-up, izidingo zokulawulwa kwe-impedance, idatha yokubhoboza, ukudweba ngomshini, kanye namafayela okuhlanganiswa.

    Kumaphrojekthi e-PCB asebenza kakhulu, ukusebenza kokugcina kukagesi kufanele kuhlolwe ezingeni lesekethe eliphelele kanye nesistimu kunokuba kuthathwe ngezimpawu ze-laminate kuphela.

    XHUMANA NATHI
    Ifektri Yomhlangano We-Turnkey-PCB

    Ukulungiselela iphrojekthi ye-TLY-5 PCB yokukhiqiza

    Ukuze uthole ikhotheshini ye-TLY-5 PCB, nikeza ukubizwa kwezinto kanye nedatha yokwenziwa echaza ibhodi eliqediwe. Lokhu kuvumela ukubuyekezwa kokukhiqiza ukuthi kugxile ekwakhiweni kwe-RF yangempela kunokuthembela egameni le-laminate kuphela.

    • Amafayela okukhiqiza e-Gerber noma e-ODB++
    • Ukufakwa kwe-PCB kanye nobukhulu be-TLY-5 obudingekayo
    • Isisindo sethusi kanye nezidingo zethusi eziqediwe
    • Izinhloso zokuvimbela ukulawulwa kanye nokubekezelelana
    • Izidingo ze-Via, imbobo ehlanganisiwe, i-backdrill, noma izingqimba eziningi
    • Ukuqeda umphezulu kanye nomdwebo womshini
    • I-BOM, amafayela okukhetha nokubeka, kanye nemidwebo yokuhlanganisa yama-oda e-PCBA

    I-Highleap Electronics inikeza izinsizakalo zokukhiqiza i-PCB ezivame kakhulu kanye nezinsizakalo zokuhlanganisa i-PCB zamaphrojekthi e-TLY-5, PTFE, RF/microwave, i-controlled-impedance, kanye ne-multilayer PCB. Ukutholakala kwezinto kanye nokwakhiwa kwebhodi lokugcina kuqinisekiswa ngokumelene nemibhalo yephrojekthi evunyiwe ngaphambi kokukhiqizwa.

    Thumela amafayela akho e-TLY-5 PCB ukuze abuyekezwe futhi akhiqizwe ngesilinganiso