Produzione e assemblaggio di circuiti stampati per luci a LED per parcheggi a cura di Highleap Electronics.

Parking-lot lighting — the shoebox luminaires on poles across car parks, retail lots, and campuses — is a high-volume outdoor category, and the smart-control and efficiency features on the board are often what differentiate the fixture: dimming in an empty lot, fault reporting, and a thermal design that holds output for a decade. Highleap Electronics fabricates and assembles the complete board set — aluminum light engine, smart driver, and surge protection — to your specification, on our aluminum outdoor LED PCB platform. We are a contract PCB factory, not a fixture brand — you design and sell the luminaire; we build its boards to your design or engineer them to your requirements. ISO 9001, MOQ 1 unit, 24-hour quote.

This page covers the light engine, photometric distribution, smart-driver assembly, and ordering. To start, inviaci i tuoi file.

1. Why Area-Lighting Manufacturers Choose Highleap for PCB Fabrication

Area lighting succeeds on three things that live on the board: wide, uniform coverage with controlled glare; smart energy control that qualifies for codes and rebates; and pole-top durability over a long, maintenance-free life. As a specialist contract manufacturer, we fabricate and assemble all three to your design, rather than shipping a generic high-power board.

• Optic-matched light engines — emitter layouts fabricated to the Type II–V distribution and full-cutoff/dark-sky requirements you specify.
• Smart-driver assembly — photocell, motion, 0–10 V/DALI, and NEMA/Zhaga control built in.
• Pole-top hardening — 10–20 kV surge protection, rivestimento conformee costruzione impermeabile.
• Costruito su specifiche, MOQ 1 unit, ISO 9001, IPC Class 2/3, OEM/white-label.
• preventivo di 24 ore with free DFM; worldwide shipping.

2. Fabricating the Area Light Engine and Photometric Distribution

Wide, uniform coverage favors a spread of emitters across a fairly large board, with the layout matched to your optic. The board is aluminum metal-core to handle heat and serve as the heat-spreading interface to your housing. We fabricate the emitter grid as the foundation of the distribution that meets the safety levels, camera needs, and trespass limits your design targets.

The relationship between the board and the optic determines whether the fixture meets its photometric target. Each emitter sits behind a lens or reflector that projects its output into a defined solid angle, so the emitter grid must register precisely with the optical array — a placement error of even a fraction of a millimeter per emitter compounds across a large board into visible striping or hot spots. We hold tight placement tolerance and fabricate the grid to your specific Type II–V distribution.

• Alluminio MCPCB — sulla nostra linea di PCB LED in alluminio.
• SMD arrays — many mid-power emitters for the wide, even pattern; see PCB LED SMD.
• Supporto alla distribuzione — Type III, Type IV forward-throw, Type V symmetric, with house-side shielding layouts.
• Tiled module builds — multiple boards for modular, field-replaceable fixtures.
• Maschera bianca ad alta riflettività to maximize usable output.

3. Assembling Smart Drivers — Photocell, Motion and Controls

The energy savings that differentiate modern area lighting come from the driver and control board, and these controls are typically what qualify a fixture for energy-code compliance and utility rebates. We assemble these boards to your control spec.

• Constant-current drivers with PFC — on our PCB driver LED e PFC piattaforme.
• Photocell dusk-to-dawn — automatic switching at light thresholds.
• Motion/occupancy sensing — PIR or microwave with adaptive dimming.
• 0–10 V and DALI dimming plus NEMA/Zhaga sockets for plug-in photocells and wireless nodes.
• Networked control — scheduling, daylight harvesting, and fault reporting on an PCB per la gestione intelligente dell'alimentazione.

4. Fixture Formats, Retrofit and Surge Protection

A large share of parking-lot lighting is retrofit, so the board has to fit many fixture formats and mounting styles, and pole-mounted lights are lightning targets. We fabricate boards to match your fixtures.

• Shoebox housings — rectangular boards sized to your gear plate.
• Kit di retrofit — boards manufactured to match existing metal-halide/HPS housing dimensions and mounting holes for drop-in replacement.
• Wall packs and canopy formats — alternative outlines for building-mounted and canopy fixtures.
• protezione contro le sovratensioni — 10–20 kV SPD, integrated on the driver or as a separate board, to your local standard.
• Impact-resistant assembly — for parking-structure fixtures, using methods from our PCB per LED per autoveicoli lavoro.

We confirm board outline, mounting, and gear layout against your housing during DFM so the fixture assembles cleanly.

5. Thermal Design and Build for a Long Service Life

Area lights run dusk-to-dawn in a sealed head and are sold by you on five-to-ten-year warranties. The board we fabricate determines whether those warranties are profitable for you to honor.

• Bassa resistenza giunzione-involucro — slows lumen depreciation so the fixture holds rated output; see progettazione termica LED e Dissipazione del calore MCPCB.
• Driver longevity — long-life capacitors and derating for continuous high-temperature operation.
• Surge survival — documented protection so field surges do not cause early failures.
• Screening di burn-in - bruciare to remove early failures before shipment.

6. Parking Lot Light PCB Capabilities & Specifications

Our parking-lot and area-light capabilities, manufactured to your specification:

7. Come ordinare: file, quantità minima d'ordine e tempi di consegna

We help match the board specification to your fixture and energy-code target, building to your design, with a free DFM review on every order.

Cosa inviare

• Fabbricazione/assemblaggio — File Gerber, file di foratura, contorno della scheda, distinta materiali, file Pick-and-Place.
• Progetto chiavi in ​​mano o su specifica — plus wattage, mounting height, distribution/optic, control needs, and any retrofit housing target.

Quantità minima d'ordine, tempi di consegna e standard

• MOQ 1 unità, nessun sovrapprezzo per il prototipo; sconti per quantità a partire da 50+.
• Fabbricazione 5-7 giorni; PCBA 7-12 giorni; moduli chiavi in ​​mano 12-18 giorni.
• ISO 9001, IPC Class 2/3, AOI and lit test; OEM/white-label with NDA; worldwide shipping.

Iniziare, Invia i file o le specifiche via email Per un preventivo entro un giorno lavorativo.

8. LED Parking Lot Light PCB FAQs

Do you sell parking lot lights, or manufacture the boards?

We manufacture and assemble the boards — the aluminum light engine and the smart driver/control board — to your specification, as bare PCBs, populated PCBAs, or complete wired modules. We are a contract PCB factory and OEM partner, not a fixture brand; you design and sell the area luminaire, and we build its electronics to your design or engineer them to your requirements.

How do parking-lot lights achieve wide, even coverage?

Through a spread of emitters across a fairly large board, with the LED layout matched to your optic — typically Type II through Type V distributions. SMD arrays of many mid-power emitters give the wide, uniform pattern while spreading heat. We fabricate emitter placement to your chosen optic so coverage and uniformity meet your photometric target, with house-side shielding layouts to control trespass.

Can you assemble photocell and motion-sensor control into the driver?

Yes. We assemble smart drivers with photocell dusk-to-dawn switching, PIR or microwave motion sensing with adaptive dimming, 0–10 V and DALI dimming, and NEMA or Zhaga sockets for plug-in photocells and wireless nodes — built to the control specification you provide. These controls are typically what qualify your fixture for energy codes and rebates.

Can you manufacture retrofit boards for existing HID area lights?

Yes. We fabricate drop-in LED modules that replace legacy metal-halide or high-pressure-sodium area heads. The key requirement is matching the board outline and mounting to the existing housing gear plate, which we confirm during the free DFM review, along with the driver and control configuration you specify.

Can you build dark-sky compliant boards?

Yes. Dark-sky compliance is about controlling backlight, uplight, and glare, which starts with the emitter layout working with a full-cutoff optic. We fabricate the array to support the full-cutoff fixture and house-side shielding you design, helping your luminaire meet dark-sky and light-trespass ordinances.