PCB Manufacturing Effective ka CAM350

Sesebelisoa sa CAM350 se sebetsa e le ts'ebetso ea pele le netefatso ea moralo e etselitsoeng lienjiniere tsa meralo kapa lienjineri tsa tšebetso tse fetisetsang meralo ho baetsi ba PCB ka liforomo tse kang Gerber, ODB++, kapa IPC-2581. Hangata e sebelisoa hammoho le software ea ho lokisa litokomane tsa moralo oa BluePrint empa e ka sebetsa joalo ka sehlahisoa se ikemetseng.

Sistimi ena e na le letoto le pharaletseng la licheke tsa meralo tse shebaneng le Design For Manufacturing (DFM), Design For Assembly (DFA), le Design For Test (DFT) ho tseba liphoso, libaka tseo e seng tsa theknoloji, mathata le liphoso. E ntan'o lokisa litaba tsena ka har'a morero oa pele oa PCB. Ho phaella moo, litokiso tse itseng li ka sebelisoa ka ho toba ho lifaele tsa Gerber, ho ntlafatsa mokhoa oa ho netefatsa le ho lokisa moralo.

Mehato ea Motheo ea CAM350 ea ho Etsa Kakaretso ea Lintlha tsa CAM

CAM350 ke sesebelisoa sa bohlokoa ts'ebetsong ea tlhahiso ea PCB, e nolofalletsang ho theha data e nepahetseng ea CAM bakeng sa tlhahiso e nepahetseng. Ha re hlahlobeng mehato e felletseng e amehang ho theheng data ea CAM re sebelisa CAM350.

1. Ho Fumana Faele le Netefatso
   • Qala ka ho kenya faele (File-> Import-> Autoimport) 'me u netefatse hore data e felile.
   • Lokisetsa lira (Edita-> Layers-> Lulahanya) ho netefatsa boemeli bo nepahetseng.
   • Beha tšimoloho (Edita-> Fetola-> Tšimoloho -> Datum Coordinate) bakeng sa boemo bo nepahetseng.
   • Rulahanya likarolo ka tatellano e lakatsehang ( Edita-> Layers-> Reorder) 'me u hlakole likarolo life kapa life tse sa sebelisoeng (Edita-> Layers-> Hlophisa hape).
2. Mokhoa oa ho cheka
   • Haeba faele ea ho cheka e sa fanoe, theha data ea ho phunya o sebelisa phetoho ea lesoba ho Flash (Lisebelisoa-> Draw-> Tloaelo, Lisebelisoa-> Draw-> Flash-> Interactive) ebe u phunya (Lisebelisoa-> Gerber to Drill).
   • Lekola boholo ba lesoba la ho cheka, sebaka se pakeng tsa lesoba ho ea ho sekoti (Hlahlobisiso-> Hlahloba ho cheka), le sebaka se fokolang lipakeng tsa sekoti le moeli oa tsela (Info->Measure->Object-Object) ho netefatsa bokhoni ba ts'ebetso.
3. Tsamaiso ea Line
   • Lekanya bonyane bophara ba terata le sebaka (Analysis->DRC) ho kopana le bokhoni ba ts'ebetso.
   • Fetola potoloho ea PAD offset e amanang le lesoba la ho phunya ha ho hlokahala (Edita–> Layers. –>Snap Pad to Drill) kapa ka tsela e fapaneng (Edita–> Layers–>Snap Drill to Pad).
   • Netefatsa hore mehele ea potoloho ea PAD e kholo ka ho lekaneng (Analysis-> DRC) 'me u hlahlobe liphatlalatso tsa moeli bakeng sa litlhoko tsa tlhahiso.
   • Netefatsa ho hlakoloa ha li-PAD tsa mela bakeng sa masoba a NPTH (Edita-> Hlakola).
   • Netefatsa sebaka pakeng tsa potoloho le mohala, mohala le PAD, 'me li-PAD li fihlela litlhoko tsa tlhahiso.
4. Solder Mask Alignment
   • Lekola tumellano lipakeng tsa mask a solder le line PAD (Analysis-> DRC).
   • Netefatsa maske a solder le sebaka sa mela, maske a solder le sebaka sa marang-rang sa PAD.
   • Etsa bonnete ba hore bonyane bophara ba mask a solder le mask a khethehileng a solder bakeng sa NPTH (Eketsa-> Flash).
5. Phetoho ea Litlhaku
   • Netefatsa bophara ba mola oa litlhaku (Info-> Report-> Dcode), bophahamo, bophara bo se nang letho, le sebaka se nang le PAD ea mola.
   • Sheba sebaka se pakeng tsa litlhaku le moeli oa tsela, sekoti, le PTH (ha ho tin) bakeng sa litlhoko tsa tlhahiso.
   • Eketsa matšoao a UL MARK le DATE CODE ho latela tlhoko ea moreki, ho netefatsa hore ha a ekeletsoe libakeng tse thibetsoeng.
6. Li-sets le Ts'ebetso ea Lehlakore la Ts'ebetso
   • Etsa likopi tse peli ho latela litlhaloso (Edita-> Kopitsa) 'me u kenye lintlha tsa lehlakoreng le sebetsang.
   • Kenyelletsa masoba a AI, masoba a boemo, lintlha tsa optical, le linomoro tsa thepa ha ho hlokahala.
   • Kenya likhutlo tsa V-CUT le lintho tse ling tse hlokahalang.
7. Panelization le Meeli ea Artwork
   • Panelize ho latela mofuta oa phanele e boletsoeng mme u thehe meeli ea litšoantšo ho latela litlhaloso tsa tlhahiso.
8. Layers
   • Sebelisa Litafole-> Lihlopha ho eketsa Lebitso la Likopano, beha polarity ea mokokotlo oa skrine (e ntle le e mpe), 'me u laole likarolo.
9. Tlhahisoleseding ea ho Epa le Boitsebiso ba ho Rala Leseli
   • Rekota bonyane bophara ba mola, sebaka sa mela, le sebaka sa koporo sa leqephe la pele le leqephe la mosebetsi.
   • Hatisa sebaka sa lesoba le tafole ea tlaleho ea boro.
   • Lintlha tsa ho phunya (File-> Export-> Drill Data) le data ea ho taka e bobebe (File-> Export-> Composites) ka lifomate tse boletsoeng.

Ka ho latela mehato ena e qaqileng, o ka etsa lintlha tse nepahetseng le tse sebetsang hantle tsa CAM o sebelisa CAM350, ho netefatsa ts'ebetso e ntle ea tlhahiso ea li-PCB.

Bakeng sa tlhahlobo e felletseng ea tlhahiso, sebelisa sengoloa sena hammoho le tlhahiso ea PCB ea tlhahiso le ho fumana likarolo tsa elektroniki ha u hlahloba litlhoko tsa stackup, kopano, kapa liteko.

Mokhoa oa ho kenyelletsa li-PCB ka CAM350

CAM350 ke sesebelisoa sa software se sebelisoang haholo ke baenjiniere ba elektroniki ho hlahloba meralo le ho kenya li-PCB ka paneleng bakeng sa tlhahiso ea SMT, ho fokotsa litšenyehelo tsa PCB . Highleap Electronic e fana ka lits'ebeletso tsa tlhahiso ea PCB ho thusa basebelisi ho fokotsa litšenyehelo tsa bona tsa PCB. Mona ke thupelo ea mohato ka mohato ea mokhoa oa ho kenya li-PCB ka paneleng u sebelisa CAM350 ho etsa hore meralo e sebetse hantle le ho theko e tlase:

Ho bula Gerber Files ka CAM350

1. Bula Lifaele tsa Gerber: Eya ho File -> Import -> Autoimport.
2. Khetha Directory: Khetha bukana e nang le lifaele tsa hau tsa Gerber.
3. Kenyelletsa Lera la Drill: Se ke oa khetha lera la ho cheka nakong ea ho kenya.
4. Qetella ho Fumana: Tobetsa konopo ea Qetella ho phethela thoto.
5. Kenya Lera la ho Sebetsa: Eya ho Faele -> Import -> Drill Data, khetha faele ea drill layer, khetha "Lifaele Tsohle," 'me u tobetse habeli faele ea drill layer. Ebe, khetha Leading ebe o tobetsa OK.

Ho boloka joalo ka faele ea PCBname.cam

1. Hlahisa li-PCB: Tobetsa Faele -> E Ncha, ebe o tobetsa File -> Bula 'me u bule PCBname.CAM.
2. Kopanya Lifaele: Tobetsa Faele -> Kopanya, khetha faele eo u batlang ho e hlophisa, ebe u e bula.
3. netefatso: Tobetsa OK ho netefatsa.
4. Sebaka: Tobetsa ka ho le letona ho beha faele kae kapa kae botong.
5. Tsamaisa Lifaele: Tobetsa Edit -> Tsamaisa ho tsamaisa lifaele tse latelang tsa Gerber moo u batlang ho li beha.
6. Phatloha Layer: Tobetsa Edita -> Fetola -> Phatloha -> Tsohle.
7. netefatso: Tobetsa letlapa le letona ka ho le letona ebe o tobetsa E.
8. Kopanya Lera: Tobetsa habeli lera la GBO (mohlala), tobetsa Khetha Tsohle, ebe o tobetsa Move To Layer.

Ho romela Boitsebiso ba Gerber

1. Export Gerber Data: Tobetsa Faele -> Export -> Gerber Data.
2. Khetha Tsela ea Export: Khetha moo o ka romelang teng le ho fetola mabitso a lifaele kamoo ho hlokahalang, ebe o tobetsa OK.
3. Export Drill Data: Tobetsa Faele -> Export -> Drill Data, fetola lebitso la faele ea drill, ebe o tobetsa OK.

Ka mor'a ho romela kantle ho naha, bula file ea Gerber e rometsoeng (File -> Ncha) ho netefatsa ho nepahala ha eona. Netefatsa hore likarolo tse latelang tsa PCB li kenyelelitsoe:

• Koporo e ka Holimo (GTL)
• Koporo e Tlase (GBL)
• Sekrine sa Silkscreen (GTO)
• Sekrine sa silika se ka tlase (GBO)
• Maske a holimo a solder (GTS)
• Maske a tlase a Solder (GBS)
• Li-Drill (TXT)

Ka ho latela mehato ena, o ka sebelisa li-PCB ka katleho ho sebelisa CAM350, ho fokotsa litšenyehelo le ho ntlafatsa katleho ea tlhahiso ea PCB.

Lisebelisoa tse Tsoetseng Pele le Mekhoa ea Tlhahiso

CAM350 e fana ka melemo e mengata e tsamaisang ts'ebetso ea tlhahiso ea PCB. E fokotsa tšebeliso ea chelete ka ho fokotsa boiteko bo pheta-phetoang ba moralo, kahoo e fokotsa litšila le ho fokotsa litšenyehelo. Ho feta moo, CAM350 e ntlafatsa tlhahiso ea meralo ea PCB, ho netefatsa hore e ka hlahisoa ka nepo. Sena se lebisa ho lipotoloho tse potlakileng tsa tlhahiso, joalo ka ha sesebelisoa se nolofatsa ts'ebetso ea moralo ho ea ho tlhahiso, ho ntlafatsa katleho ka kakaretso.

Ho feta moo, CAM350 e iketsetsa mekhoa e fapaneng ea meralo, e hlahisang meralo e ntlafalitsoeng le ts'ebetso e eketsehileng. E boetse e ntlafatsa boleng le taolo ea polokelo ea polokelo, ho thusa ho boloka maemo a holimo le ho laola ka nepo li-database tsa meralo. Ka kakaretso, CAM350 e kenya letsoho tlhahisong e ntle ea boima ba liboto tse se nang letho, e ntlafatsang katleho ea tlhahiso.

Mesebetsi ea mantlha ea CAM350

1. Tšehetso ea Sebopeho: E ts'ehetsa liforomo tse ngata tsa ho kenya / lihlahisoa (data ea CAD, ODB ++, Gerber, IPC-356, Excellon, DXF, Sieb le Myers) 'me e fana ka tšehetso ea litsela tse peli tsa AutoCAD le DXF.
2. Tlhahlobo ea Molao oa Moqapi: E kenyelletsa sebaka, li-loop lines, lipalo tsa sebaka sa koporo, le papiso ea marang-rang bakeng sa ho ntlafatsa moralo.
3. Mohlophisi oa NC: Mesebetsi ea mantlha ea ho hlophisa ka lesoba, tlhaloso ea lisebelisoa tsa ho phunya, tsela ea ho sila, le taolo ea lintlha tsa ho phahamisa lisebelisoa.
4. Ho palama ka potlako: E lumella popo ea PCB ho fihlela litlhoko tsa tlhahiso le ho hlahisa manane a nepahetseng a litlhoko tsa ts'ebetso ea tlhahiso.
5. Tšebelisano 'moho le ho Fumana Phoso: E ts'ehetsa li-Cross-probe tse sebetsanang le ho totobatsa liphoso ho lisebelisoa tsa CAD (Allegro le PADS) bakeng sa tokiso e potlakileng.
6. Netlist Papiso: Ts'ebetso e ntlafalitsoeng ea papiso ea netlist e nang le boemeli ba liphoso tsa litšoantšo bakeng sa ho lemoha liphoso le ho li lokisa habonolo.
7. Batch Rule Check: E lumella basebelisi ho hlalosa le ho etsa letoto la melao ea moralo (DRC), moralo oa masela (DFF), le papiso ea lenane la marang-rang bakeng sa netefatso e nepahetseng.

Likarolo le ts'ebetso e felletseng ea CAM350 e e etsa sesebelisoa sa bohlokoa ho baetsi ba PCB, e ba thusang ho sebetsana le mathata a moralo le ho ntlafatsa ts'ebetso ea tlhahiso.