Tlhahiso le Kopano ea PCB ea Maqhubu a Phahameng ea TLY-5
Highleap Electronics e fana ka tlhahiso le kopano ea TLY-5 PCB bakeng sa meralo ea RF, microwave, radar le mmWave ho sebelisoa mekhoa e laoloang ea tlhahiso ea PCB ea maqhubu a phahameng.
TLY-5 ke eng?
TLY-5 ke laminate ea PTFE e lohiloeng ka khalase e matlafalitsoeng e fanoang hona joale ke AGC bakeng sa lits'ebetso tsa potoloho ea maqhubu a holimo le ea microwave. Thepa ena e kopanya constant ea dielectric e tlase le ntlha e fokolang haholo ea ho qhalana, e leng se etsang hore e be ea bohlokoa meralong ea PCB moo tahlehelo ea phetisetso, boitšoaro ba impedance, le ts'ebetso ea RF e leng lintho tsa bohlokoa tseo u lokelang ho li nahana.
Highleap Electronics e hlahisa le ho kopanya li-PCB bakeng sa merero e hlalosang TLY-5. Karolo ea rona ke tlhahiso ea li-PCB le tlhahiso ea li-PCBA ho fapana le tlhahiso ea laminate, ka tlhokomelo ea boenjiniere e shebaneng le ho bokellana ha liboto, jiometri ea RF, ho cheka, ho poleiti, ho qeta bokaholimo le litlhoko tsa kopano ea boto e felileng.
Kakaretso ea Boitsebiso
- Moetsi oa Hona Joale: AGC
- Sehlahisoa: TLY-5
- Lelapa la Lintho tse bonahalang: PTFE e lohiloeng-Khalase e Matlafalitsoeng
- Dr e tloaelehileng @ 10 GHz: 2.20 ± 0.02
- Tloaelo ea Df @ 10 GHz: 0.0009
- E etselitsoe Likopo tsa PCB tse Phahameng
Litšobotsi tse Amanang le PCB
- Tahlehelo e Tlase haholo ea Dielectric
- Dielectric Constant e tlase
- Mongobo o Tlase
- Matlafatso ea Khalase e Lohiloeng ka Tekanyo e sa Feleng
- E loketse bakeng sa Dipotoloho tsa Microwave le mmWave
- E fumaneha ka Botenya bo Bongata ba Laminate
Matlotlo a Tekheniki a TLY-5 bakeng sa Litšupiso tsa Boenjiniere ba PCB
Litekanyetso tse latelang li akaretsa thepa e khethiloeng ea TLY-5 e amanang le moralo le tlhahiso ea PCB e sebelisoang khafetsa. Ke boleng ba litšupiso tsa thepa ho fapana le litlhaloso tsa li-PCB tsa Highleap tse felileng.
| Property | Boleng bo tloaelehileng | Unit | Method teko |
|---|---|---|---|
| Dielectric Constant (Dk) @ 10 GHz | 2.20 ± 0.02 | - | IPC-650 2.5.5.5 |
| Ntlha ea ho Hasana (Df) @ 10 GHz | 0.0009 | - | IPC-650 2.5.5.5 |
| Ho khanna ho chesang | 0.22 | W/m·K | EA-433-ASTM |
| CTE X / Y / Z (25–260°C) | 26 / 15 / 217 | ppm / ° C. | ASTM D3386 (TMA) |
| Ho monya mongobo | 0.02 | % | IPC-650 2.6.2.1 |
| Ho hanyetsa Molumo | 1 × 1010 | MΩ·cm | IPC-650 2.5.17.1 |
| Resistivity ea bokaholimo | 1 × 108 | MΩ | IPC-650 2.5.17.1 |
| segokanyipalo | 2.19 | g / cm³ | ASTM D792 |
| Ho tsuba | V-0 | Rating | UL 94 |
Mantsoeng a
- Boleng bo kaholimo ke data e tloaelehileng ea litšupiso tsa thepa 'me ha ea lokela ho hlalosoa e le litlhaloso tse tiisitsoeng bakeng sa li-PCB tse felileng.
- Liphetho tsa motlakase le tsa mechini li ka itšetleha ka botenya ba laminate, kaho ea koporo, maemo a ts'ebetso, le mokhoa oa teko.
- TLY-5 e fumaneha hona joale ke AGC. Sheba litokomane tsa morao-rao tsa tekheniki tsa moetsi oa thepa bakeng sa litlhaloso tsa hajoale, botenya bo fumanehang, likhetho tsa koporo le tlhaiso-leseling ea litšoaneleho.
Litšebeliso tsa TLY-5 PCB ho RF, Microwave, Radar le Litsamaiso tsa Puisano
Li-PCB tsa TLY-5 li nahanoa haholo-holo bakeng sa lisebelisoa tsa RF, microwave, le millimeter-wave moo tahlehelo ea dielectric le boitšoaro ba mohala oa phetisetso e leng likarolo tsa bohlokoa tsa moralo oa potoloho. Thepa ena hajoale e fanoa ke AGC 'me e sebelisoa lits'ebetsong tsa maqhubu a holimo ho tloha ho radar ea likoloi le lisebelisoa tsa puisano ho ea ho lipotoloho tsa sefofane le microwave tse ka pele.
Bakeng sa lits'ebetso tsena, laminate ke karolo e le 'ngoe feela ea tsela ea lets'oao la RF. PCB e felileng e boetse e itšetlehile ka geometry ea mohala oa phetisetso, botenya ba dielectric, profil ea koporo, likarolo tse koahetsoeng, meaho ea fatše, lihokelo, liphetoho le qetello ea bokaholimo. Lintlha tsena li lokela ho hlahlojoa hammoho ha ho fetoloa moralo oa RF hore e be PCB e ka etsoang.
-
Li-PCB tsa Radar tsa Likoloi:
TLY-5 e ka nahaneloa bakeng sa lipotoloho tsa radar tse sebetsang ho pota 77 GHz le maqhubu a mang a maqhubu a millimeter. Ho etsoa ha PCB bakeng sa meralo ena ho hloka tlhokomelo e haufi-ufi ho jiometri ea trace ea RF, likarolo tsa conductor, ngoliso, le liphetoho lipakeng tsa mela ea phetiso le likarolo. -
Puisano ea Sathelaete le ea Selefouno:
Lisebelisoa tsa puisano tse nang le maqhubu a phahameng li ka sebelisa TLY-5 lijong tsa antenna, marangrang a kabo ea RF, likarolo tsa transmitter le receiver, le potolohong e amanang le microwave moo tahlehelo e tlase ea dielectric e leng karolo ea tlhoko ea motlakase. -
Li-PCB tsa Amplifier ea Matla a RF:
Dipotoloho tsa motlakase-amplifier di kopanya ditlhoko tsa phetiso ya RF le dintlha tsa motheo, motheo, koporo le moralo wa mocheso. Ka hona, kaho ya ho qetela ya PCB e lokela ho ntshetswa pele ho potoloha tlhaloso ya laminate le moralo o felletseng wa amplifier. -
Lipotoloho tsa LNB, LNA le Microwave Front-End:
Likopano tsa lerata le tlase le phetoho ea maqhubu hangata li na le litsela tse khutšoane tsa RF tse amehang ke impedance. Methapo ea phetiso e laoloang, ka ho beha, meaho ea fatše, liphetoho tsa likarolo, le li-interface tsa kopano e ba lintlha tsa bohlokoa tsa tlhahiso. -
Meralo ea PCB ea Ka-, E- le W-Band:
Maemong a phahameng a maqhubu a microwave le a millimeter, liphetoho tse nyane haholo jiometring ea PCB li ka ba tsa bohlokoa haholo. Litšoantšo tsa tlhahiso li lokela ho hlalosa ka ho hlaka pokello e hlokahalang, kaho ea koporo, litekanyo tsa bohlokoa le likarolo tsa RF. -
Lisebelisoa tsa Elektroniki tsa Sefofane sa RF:
TLY-5 e ka boela ea hlalosoa bakeng sa puisano ea sefofane, antenna, le likopano tsa elektroniki tsa RF. Litlhoko tsa 'nete tsa PCB li itšetlehile ka moralo oa lisebelisoa, tikoloho ea ts'ebetso, kaho ea mechini, le litlhoko tse sebetsang tsa mangolo.
Highleap Electronics e fana ka lits'ebeletso tsa tlhahiso ea li-PCB tsa TLY-5 le kopano ea li-PCB bakeng sa merero ea RF, microwave, millimeter-wave, radar, antenna le puisano. Re hlahisa ho tsoa litokomaneng tsa PCB tse lokollotsoeng, ho kenyeletsoa le sehlopha se amohetsoeng sa thepa, ho bokellana, litlhoko tsa thibelo e laoloang, data ea ho phunya, ho taka ka mechine le lifaele tsa kopano.
Bakeng sa merero ea PCB e nang le maqhubu a phahameng, ts'ebetso ea ho qetela ea motlakase e lokela ho hlahlojoa boemong bo felletseng ba potoloho le sistimi ho fapana le ho hakanyetsoa ho tsoa litšobotsing tsa laminate feela.
Ho lokisa Morero oa TLY-5 PCB bakeng sa Tlhahiso
Bakeng sa khotheishene ea TLY-5 PCB, fana ka tlhaloso ea thepa hammoho le lintlha tsa tlhahiso tse hlalosang boto e felileng. Sena se lumella tlhahlobo ea tlhahiso ho tsepamisa maikutlo ho kaho ea 'nete ea RF ho fapana le ho itšetleha ka lebitso la laminate feela.
- Lifaele tsa tlhahiso ea Gerber kapa ODB++
- Ho bokellana ha PCB le botenya ba TLY-5 bo hlokahalang
- Boima ba koporo le litlhoko tsa koporo tse felileng
- Lipheo le mamello tse laoloang tsa impedance
- Litlhoko tsa Via, lesoba le phuthetsoeng, backdrill, kapa multilayer
- Qetello ea bokaholimo le setšoantšo sa mechini
- BOM, lifaele tsa ho khetha le ho beha, le litšoantšo tsa kopano bakeng sa liodara tsa PCBA
Highleap Electronics e fana ka lits'ebeletso tsa tlhahiso ea PCB tse sebelisoang khafetsa le tsa kopano ea PCB bakeng sa merero ea TLY-5, PTFE, RF/microwave, controlled-impedance, le multilayer PCB. Ho fumaneha ha thepa le kaho ea boto ea ho qetela li tiisoa khahlanong le litokomane tsa projeke tse amohetsoeng pele ho tlhahiso.
Romela difaele tsa hao tsa TLY-5 PCB bakeng sa tlhahlobo ya tlhahiso le khotheishene