Kopano ea PCB ea Rogers 3010

Kopano ea PCB ea Rogers 3010 e lokela ho nkoa e le projeke ea tlhahiso ea turnkey ha boto ea RF e kenyelletsa tlhahiso ea jiometri e laoloang le kopano ea elektroniki. Khetho ea thepa ea boto ke karolo e le 'ngoe feela ea tokollo; ho beoa ha likarolo, litsela tsa mocheso, boemo ba ho kopanya le litekanyetso tsa tlhahlobo le tsona li ama mojule o felileng. Sebaka sa thepa: Leqephe lena le ama tlhahiso ea PCB ho sebelisoa thepa e boletsoeng ea Rogers. Highleap Electronics e etsa boto e felileng le PCBA; tlhahiso ea laminate le thekiso ea thepa li ka ntle ho sebaka sa rona sa tšebeletso. Pele ho lokolloa sephutheloana sa tlhahiso, lintlha tsa motlakase le thepa tsa RO3010 li lokela ho lumellana le stackup le jiometri ea RF e reriloeng.

Ha ho tluoa tabeng ea lisebelisoa tsa PCB tse phahameng ka ho fetisisa, tse sebetsang hantle haholo, Rogers RO3010 e hlahella e le e 'ngoe ea lisebelisoa tse tsoetseng pele ka ho fetisisa tsa PTFE tse tletseng ceramic 'marakeng. Ka dielectric constant (Dk) ea 10.2 ± 0.25 le ultra-low dissipation factor of 0.0022 at 10 GHz, e sebelisoa haholo lits'ebetsong tse mahlonoko tsa RF le microwave moo botšepehi le botsitso ba matšoao li ke keng tsa buisanoa.

Ho Highleap Electronics, re karolo ea rona ea tlhahiso e koahelang tlhahiso le kopano ea RF PCB ka taolo ea ts'ebetso e hlokoang ke litlhaloso tsa boto e lokollotsoeng. Hore na u nts'etsapele li-module tsa 5G, li-sensor tsa radar, kapa litsamaiso tsa puisano tsa sathelaete, re ka u thusa ho fetola meralo ea hau e rarahaneng hore e be lihlahisoa tse tšepahalang.

Kgatelelo ya tlhahiso mona ke phetoho ho tloha boto e se nang letho ya RO3010 ho ya ho sehlahiswa sa RF se kopaneng. Kaho ya boto, bokgoni ba ho kopanya, ho bewa ha dikarolo, di-interface tsa dihokelo le tlhahlobo di hloka ho hlahlojwa mmoho ha mamello ya kopano e ka ama sebopeho sa RF.

Rogers 3010 Kaho le Sekhahla sa Tlhahiso ea RF

RO3010 ke karolo ea Rogers' RO3000 letoto la laminate tse sebetsang hantle haholo, tse etselitsoeng maqhubu a microwave le millimeter-wave. Boemo ba eona bo phahameng ba dielectric bo lumella baqapi ba potoloho ho fokotsa bophara ba mela le ho theha li-circuits tsa RF tse kopaneng, tse bohlokoa lits'ebetsong tse hatelletsoeng ka boholo joalo ka:

• Li-amplifiers tsa matla tsa 5G
• Radar ea likoloi ho 77-79 GHz
• Li-antenna tsa sebaka sa moeeng tse arotsoeng ka mekhahlelo
• Lisebelisoa tsa bongaka tsa microwave
• Phallo e phahameng ea RF le tlhahlobo ea mafu

Ka lebaka la CTE ea eona e tlase ea z-axis (coefficient of thermal expansion) le ho tšoana hantle le koporo, Rogers 3010 e sebetsa hantle tlas'a khatello ea mocheso le mojaro oa mechini. E boloka litšobotsi tse tsitsitseng tsa motlakase holim'a mocheso o pharaletseng ho tloha ho -55°C ho isa ho +150°C, e leng se etsang hore e tšoanelehe hantle libakeng tse thata.

Ho utloisisa Rogers RO3010 Material Characters for Manufacturing

Lintho tsa Bohlokoa tsa Motlakase tse Amang Ho Etsa

Ts'ebetso ea rona ea tlhahiso ea Rogers RO3010 PCB e ikarabella bakeng sa lintlha tsena tsa bohlokoa tsa thepa:

• Kamehla ea Dielectric: 10.2 ± 0.30 (Tshebetso) / 11.20 (Moetso, 8-40GHz)
• Sesosa sa ho Tsamaea: 0.0022 ho 10GHz le 23°C
• Thermal Coefficient of εr: -395 ppm/°C (-50 ho isa ho 150°C)
• Ho hanyetsa Molumo: 10⁵ MΩ•cm

Thepa ea 'Mele e Amang Ts'ebetso ea Tlhahiso

• Ho khanna ho chesang: 0.95 W / m / K - Matla a phahameng a ho senya mocheso
• CTE (X,Y,Z axis): 13, 11, 16 ppm/°C ka ho latellana - Botsitso bo botle ba sebopeho
• Decomposition Temperature: 500 ° C - Matla a phahameng a mocheso
• segokanyipalo: 2.8 g/cm³ - Thepa e lumellanang

Litlhaloso tsena li susumetsa ka kotloloho lits'ebetso tsa rona tsa ho cheka, ho plata, ho fata le ho lamination ho netefatsa liphetho tse tsitsitseng.

Rogers RO3010 PCB Manufacturing Capabilities

Likhetho tse Tloaelehileng tsa Botenya bakeng sa Custom Rogers RO3010 PCB

Re etsa liboto tsa potoloho tsa Rogers RO3010 ka botenya ba maemo a mangata:

• 0.005″ (0.13mm) ± 0.0005″ - Lisebelisoa tse tšesaane haholo
• 0.010″ (0.25mm) ± 0.0007″ - Meralo e tloaelehileng ea maqhubu a holimo
• 0.025 ″ (0.64mm) ± 0.0010 ″ - Lisebelisoa tsa botenya bo mahareng
• 0.050 ″ (1.28mm) ± 0.0020″ - Litlhokahalo tse matla tsa mochini

Likhetho tsa Copper Cladding

Ts'ehetso ea litšebeletso tsa kopano ea Rogers RO3010 PCB:

• ½ oz. (18μm) Electrodeposited Copper Foil
• 1 oz. (35μm) Electrodeposited Copper Foil
• Boima ba koporo ba tloaelo bakeng sa litlhoko tse khethehileng tsa impedance

Panel Size Bokhoni

Thepa e tloaelehileng e kenyelletsa:

• 12 × 18 ″ (305 × 457mm) - tlhahiso e tloaelehileng
• 24″ × 18″ (610 × 457mm) - Lisebelisoa tse kholo tsa sebopeho

Melemo ea Bohlokoa ea Tekheniki ea RO3010 ho Moralo oa Microwave

Rogers RO3010 e etselitsoe meralo ea RF ea maqhubu a holimo le e phahameng haholo moo ts'ebetso e ke keng ea senyeha. Mehaho ea eona ea motlakase le ea mocheso e etsa hore e tšoanelehe hantle bakeng sa lisebelisoa tsa microwave tse matla haholo tse kang liamplifiers, li-filters, li-module tsa radar le li-antenna.

Tekano e Phahameng ea Potoloho

Ka dielectric constant (Dk) ea 10.2, RO3010 e lumella lithapo tse khuts'oane tsa phetisetso le sebaka se matla sa ho latela mohlala-ho nolofalletsa tlhophiso ea compact RF ntle le ho tela taolo ea ho thibela. Sena ke sa bohlokoa ka ho khetheha lits'ebetsong tse thibelang sebaka se kang lisele tse nyenyane tsa 5G, li-transceivers tsa radar, le li-coupupers tse phahameng-frequency, moo lisebelisoa tse phahameng tsa Dk PCB li thusang ho fokotsa potoloho ea potoloho ha li ntse li boloka botšepehi ba matšoao.

Botsitso ba Mocheso le Tikoloho

RO3010 e fana ka monya o tlase wa mongobo le tshepahalo e ntle ya mocheso, e boloka tshebetso e tsitsitseng ho pholletsa le mefuta e mengata ya mocheso. CTE ya yona ya z-axis e tshwana haufi le ya koporo, e fokotsa kgatello ya mechine nakong ya potoloho ya mocheso. Sena se etsa hore e tshwanelehe hantle bakeng sa ho kenngwa ha tikoloho e thata ho kenyeletswa le ditsamaiso tsa antenna tsa kantle, di-elektroniki tsa radar tsa dikoloi, le di-module tsa puisano tsa sathelaete.

Boitšoaro bo tsitsitseng ba RF ho pholletsa le Mocheso

E 'ngoe ea litšobotsi tse hlalosang RO3010 ke coefficient ea eona e tlaase ea mocheso ea dielectric constant (TCDk), e thusang ho boloka mohato o tsitsitseng oa pontšo le ho thibela ho fetoha ha mocheso. Lits'ebetsong tse mahlonoko tsa RF joalo ka radar e kentsoeng koloing, loops e notletsoeng ka mekhahlelo, kapa li-VCO, sena se netefatsa ts'ebetso ea RF e sa lebelloang ntle le tlhoko ea ho nchafatsoa khafetsa.

Kakaretso ea PCBA ea Rogers RO3010

Litsamaiso tsa Radar ea Likoloi

Ts'ehetso ea lits'ebeletso tsa bafani ba rona ba Rogers RO3010 PCB:

• 24GHz le 77GHz li-module tsa radar tsa likoloi
• liboto tsa potoloho ea sensor ea ADAS
• Lisebelisoa tsa elektronike tsa ho qoba ho thulana
• Likopano tsa radar tsa thuso ea ho paka

Mehala ea likhokahanyo

Likopo tse phahameng tsa PCB Rogers RO3010 li kenyelletsa:

• Li-amplifiers tsa motlakase tsa setsi sa 5G
• Lihokelo tsa puisano tsa microwave
• Thepa ea lisebelisoa tsa mehala ea cellular
• Li-module tsa ho sebetsa ka lipontšo

Aerospace le Electronics Tšireletso

Lisebelisoa tse ikhethileng tse hlokang tsebo ea moetsi oa boto ea potoloho ea Rogers RO3010:

• Mekhoa ea puisano ea satellite
• Lisebelisoa tsa radar tsa sesole
• Mekhoa ea ntoa ea elektronike
• Avionics lipotoloho tse phahameng-frequency

Litlhahiso tsa Moqapi bakeng sa Tšepahalang ea Rogers RO3010 PCB Fabrication

Ho rala ka Rogers RO3010 ho hloka ho fetang feela boiphihlelo bo tloaelehileng ba sebopeho sa PCB . Ka lebaka la sebopeho sa eona se phahameng sa dielectric le sebopeho sa PTFE-ceramic, baenjiniere ba tlameha ho ikarabella bakeng sa boits'oaro bo ikhethang ba thepa ho netefatsa ts'ebetso ea lets'oao le ho khoneha ho le etsa. Ho Highleap Electronics, re thusa bareki ho ntlafatsa meralo ea bona ea RF le li-stackup ho fihlela litlhoko tse thata tsa impedance le litlhoko tsa mocheso. Mohlala o nepahetseng oa Drk (10.2) maqhubung a ts'ebetso, hammoho le ho kenyelletsoa ha li-coupon tsa liteko, ho netefatsa taolo e nepahetseng ea impedance bakeng sa litsela tsa maqhubu a phahameng joalo ka li-filters, li-couplers le li-amplifier.

Via sebopeho ke ntlha e 'ngoe ea bohlokoa ho meralo ea RO3010. Katoloso e tlase ea z-axis le litšobotsi tse ikhethang tsa mochini li hloka maano a nepahetseng a ho cheka le ho pola. Re khothaletsa ho sebelisa likarolo tse laoloang hantle ho boloka botšepehi le ho fokotsa molumo oa li-stub resonance, haholo-holo ho litlhophiso tsa mekhahlelo e mengata kapa lits'ebetsong tsa lebelo le holimo. Bakeng sa litsamaiso tse hlokang mocheso tse kang radar kapa li-module tsa RF tsa motlakase, ho futhumatsa ka li-arrays le mekhoa e ntlafalitsoeng ea ho cheka ho bohlokoa ho netefatsa hore mocheso o fela ntle le ho senya boleng ba matšoao.

Ho ya ka pono ya tlhahiso, RO3010 e hloka mamello e tiileng le taolo e hlokolosi ya tshebetso. Ho Highleap, re boloka mamello ya impedance ya ±10%, ho nepahala ha boholo ba ±0.001”, le phapang ya botenya ba boto ya ±5% ho pholletsa le phanele. Mohala wa rona wa tlhahiso o hlophisitswe bakeng sa ho kgopama ho laolwang ho tshehetsa boitshwaro bo tsitsitseng ba RF. Phanele ka nngwe e feta dipotolohong tsa pele ho ho baka le lamination e shebaneng le RF ho netefatsa botsitso ba sebopeho le motlakase—e leng se fellang ka tshebetso e tshepahalang ho pholletsa le tlhahiso e nngwe le e nngwe. Pele ho SMT, Highleap e ka hlahloba boto e entsweng, motswako wa sephutheloana sa dikarolo, jiometri ya pad le ho taka kopano mmoho. Dikarolo tsa RF di lokela ho sireletswa ho phapang e ka qojwang ya tshebetso ka ho boloka dibaka tse laolwang di hlakile morerong wa kopano le ho hlalosa ditlhoko dife kapa dife tse ikgethang tsa tlhahlobo kapa X-ray pele mola o rerilwe. Boleng ba thepa ya thepa bo nepahetseng bo lokela ho hlahlojwa kgahlanong le ditokomane tsa mofani wa hajwale bakeng sa kereiti e boletsweng le kaho.

Hobaneng u Khetha Highleap Electronics bakeng sa Rogers RO3010 PCB Manufacturing

Jwalo ka moetsi wa PCB wa profeshenale Chaena, Highleap Electronics e kopanya boiphihlelo bo tebileng ba ho sebetsana le laminate e phahameng le tlhahiso ya tshebeletso e felletseng le tshehetso ya bareki e arabelang. Bakeng sa bareki ba sebetsang le Rogers RO3010, ha re fane feela ka tlhahiso e nepahetseng empa hape le temohisiso ya boenjiniere e hlokahalang ho netefatsa katleho ya pele. Khotheishene e lokela ho hlwaya ditaolo tsa tlhahiso le tshebetso ya RO3010 hammoho le ditlhoko tsa kaho le tlhahlobo ya thepa.

Setsebi se Pakiloeng

Sehlopha sa rona sa boenjiniere se na le phihlelo litlhoko tse khethehileng tsa PTFE-ceramic laminates tse kang RO3010. Re utloisisa mokhoa oa ho ntlafatsa liparamente tsa ts'ebetso ho boloka botšepehi ba RF le ho e etsa. Ho tloha ho mohlala oa impedance ho ea ho tsamaiso ea mocheso, re thusa bareki ka:

• Phekolo ea pele ea thepa le polokelo bakeng sa botsitso ba dimensional
• Maano a ho cheka le ho cheka ho qoba liphoso tsa delamination kapa plating
• DFM (Design for Manufacturability) e etselitsoeng li-high-Dk, li-stackups tsa maqhubu a phahameng
• Tšehetso ea ho rarolla mathata bakeng sa meralo e rarahaneng ea li-microwave tse ngata

Litšebeletso tsa Qetello-pele tsa Tlhahiso

Re fana ka phetoho e laoloang ho tloha tlhahisong ea mohlala ho ea tlhahisong, re laola mohato o mong le o mong oa projeke ea hau ea RO3010 PCB:

• tlhahiso ea mehlala ka boeletsi ba stackup le ketsiso ea impedance
• Ho fumana likarolo tsa RF-grade le likarolo tse sa sebetseng
• Kopano ea SMT le ka lesoba, ho kenyeletsoa likarolo tsa RF tse hlakileng
• Teko e sebetsang, netefatso ea impedance, le litokomane tse felletseng tsa QA

Hore na o etsa tlhahlobo ea likarolo tse 5 kapa o eketsa litekanyetso ho isa ho likete tsa liyuniti, re boloka maemo a tšoanang a boleng le ho ela hloko lintlha.

Boenjiniere bo Arabang le Tšehetso

Se re khethollang ha se feela bokhoni ba rona ba tekheniki, empa hape le tsela eo re sebetsang le uena ka eona. Highleap e fana ka:

• Tlhahlobo ea moralo oa pele ho tlhahiso le likhothaletso tsa moralo, ka moralo le ts'ebeliso ea thepa
• Puisano e pepeneneng le ea kamehla nakong eohle ea ho laela
• Litlaleho tse felletseng tsa kaho, lintlha tse bokellaneng, le liphetho tsa liteko tsa impedance bakeng sa tumellano le netefatso
• Ts'ehetso ea boenjineri ka mor'a delibari, ho kenyeletsoa thuso ka lintlafatso, liodara bocha, kapa ho holisa

Sepheo sa rona ke tšebelisano ea nako e telele. Ha u khetha Highleap Electronics, u sebetsa le sehlopha se utloisisang lisebelisoa le libaka tsa ts'ebeliso tseo li-PCB tsa hau tsa RO3010 li tla sebetsa ho tsona.

lihokelo-tsa-kahare-tsa-highleap-fokolang-20260609:1125453

Haeba tlhoko ena e ama ho ntsha kapa ho lokolla tlhahiso, e bapise le tlhahiso ya PCB e phahameng le bokgoni ba ho etsa PCB pele o romela difaele tsa ho qetela bakeng sa tlhahlobo.

Ho qala ka Morero oa hau oa Rogers RO3010 PCB

Hore na o hloka liboto tsa potoloho ea Rogers RO3010 kapa tlhahiso e phahameng haholo, sehlopha sa rona se ikemiselitse ho buisana ka litlhoko tsa hau tse ikhethang. Re fana ka litlhaloso tse qaqileng, maikutlo a moralo, le likhothaletso tsa tlhahiso ho netefatsa katleho ea projeke ea hau.

Ikopanye le sehlopha sa rona sa boenjiniere ho buisana ka litlhoko tsa hau tsa tlhahiso ea Rogers RO3010 PCB. Re tla lekola lintlha tsa hau, re fane ka moralo oa likhothaletso tsa tlhahiso, 'me re fane ka tlhahiso e felletseng e lumellanang le litlhoko tsa kopo ea hau.

Phihlelo ea rona ka thepa e sebelisoang khafetsa le boitlamo ba boleng bo re etsa hore re be molekane oa hau oa tlhahiso bakeng sa lits'ebeletso tsa tlhahiso le kopano tsa Rogers RO3010 PCB . Khotheishene ea kopano e lokela ho kenyelletsa data ea Gerber kapa ODB++, BOM, lifaele tsa ho khetha le ho beha, litšoantšo tsa kopano, bongata le litlhoko tsa liteko. Bakeng sa liboto tse tsoakiloeng tsa RF le tsa dijithale, hlokomela likarolo tsa bohlokoa le libaka tse sa amaneng kahoo tlhahiso le litheko tsa PCBA li ipapisitse le likhopolo tse tšoanang tsa tlhahiso.