Isola I-Tera MT40: Litharollo tsa PCB tsa Ts'ebetso e Phahameng bakeng sa Likopo tsa RF & Microwave

Ha lisebelisoa tsa elektroniki li sutumelletsa meeli ea lebelo, ts'ebetso le ts'epahalo, tlhoko ea lisebelisoa tsa PCB tse sebetsang hantle e ntse e hola. Isola I-Tera MT40 ke laminate e tsoetseng pele ea tahlehelo e tlase e etselitsoeng ho fihlela litlhoko tse thata tsa lisebelisoa tse phahameng tsa digital, RF, le microwave. E fana ka mochine o tsitsitseng oa dielectric (Dk), ultra-low dissipation factor (Df), le ts'episo e ikhethang ea mocheso, I-Tera MT40 ke mokhoa o mong o loketseng oa PTFE laminates, o fana ka ts'ebetso e phahameng ha o ntse o boloka ho lumellana le mokhoa o tloaelehileng oa FR-4.

Sengoliloeng sena se fana ka tlhahlobo e tebileng ea Isola I-Tera MT40, thepa ea eona ea motlakase le ea mocheso, melemo ho feta lisebelisoa tsa setso, le lits'ebetso tsa bohlokoa ho pholletsa le sebaka sa lifofane, likoloi, likhokahano tsa mehala le liindasteri tsa bongaka.

Isola I-Tera MT40 ke eng?

Isola I-Tera MT40 ke PCB ea tahlehelo e tlase, e ts'eptjoang haholo ea laminate le prepreg e entsoe bakeng sa lits'ebetso tse phahameng tsa dijithale le tsa RF. E fana ka:

✔ Ts'ebetso e tsitsitseng ea motlakase ho pholletsa le mefuta e mengata ea maqhubu
✔ Mefuta e metle ea mocheso, ho netefatsa ho tšepahala ha nako e telele
✔ Ho lumellana le mekhoa e tloaelehileng ea FR-4, ho fokotsa ho rarahana ha tlhahiso
✔ Mefuta e meng e nang le litšenyehelo tse ngata ho li-laminates tse thehiloeng ho PTFE, e fanang ka ts'ebetso e ts'oanang ka ts'ebetso e bonolo

Ka Df ea eona e tlase ea 0.0031 le Dk e tsitsitseng ea 3.45, I-Tera MT40 e loketse hantle bakeng sa likopo tse hlokang taolo e nepahetseng ea impedance, tahlehelo ea pontšo e tlaase, le botsitso bo phahameng ba mocheso.

Lintho tsa bohlokoa tsa Motlakase le Thermal tsa Isola I-Tera MT40

1. E tsitsitseng Dielectric Constant (Dk) bakeng sa Botšepehi bo Phahameng ba Pontšo

• Dielectric constant (Dk) = 3.45 (± 0.05) ho 10 GHz, ho netefatsa ho sotha ha matšoao a fokolang.
• E boloka botsitso holim'a mocheso o pharaletseng (-55 ° C ho ea + 125 ° C) bakeng sa ts'ebetso e tsitsitseng ea motlakase.
• E fana ka taolo e nepahetseng ea impedance, e bohlokoa bakeng sa meralo ea potoloho ea dijithale, RF, le microwave.

2. Ultra-Low Dissipation Factor (Df) bakeng sa Tahlehelo e Nyenyane ea Pontšo

• Df = 0.0031 ho 2 GHz, 5 GHz, le 10 GHz, ho fokotsa haholo tahlehelo ea ho kenya.
• E ntlafatsa ts'ebetso ea phetisetso ea mats'oao, e etsa hore e lokele lits'ebetso tsa GHz-speed.
• E fetisa thepa e tloaelehileng ea FR-4, eo hangata e nang le Df e phahameng (~ 0.02+), e lebisang ho tahlehelo e eketsehileng.

3. Ho Tšepahala ho Hoholo ha Thermal & Mocheso oa ho Senyeha (Td) bakeng sa Bophelo bo Bolelele

• Tg (Mocheso oa phetoho ea khalase) = 200 ° C, ho netefatsa hore mocheso o hanyetsana le mocheso o tsitsitseng le botsitso ba dimensional.
• Td (Mocheso oa ho senyeha) = 360 ° C (5% ho theola boima ba 'mele), ho thibela ho senyeha ha lik'hemik'hale ka mocheso o phahameng.
• E ts'ehetsa ho ts'epahala ha nako e telele maemong a feteletseng a ts'ebetso, e etsa hore e tšoanelehe bakeng sa lisebelisoa tsa likoloi, sefofane le matla a phahameng.

4. Ho Monyeha ha Metsi a Tlase bakeng sa Ts'ebetso e tsitsitseng ea Motlakase

• Ho kenngoa ha metsi = 0.1%, ho fokotseha haholo ho feta maemo a tloaelehileng a FR-4 le li-laminate tse ling tse lebelo le phahameng.
• E boloka thepa ea dielectric, esita le libakeng tse nang le mongobo o phahameng, ho netefatsa ts'ebetso e tšepahalang ka nako.
• E fokotsa kotsi ea ho senyeha ha dielectric le ho senyeha ha thepa, ho ntlafatsa nako e telele ea potoloho.

5. Molemo ka ho Fetisisa Thermal Conductivity bakeng sa Phallo ea Mocheso e Matlafalitsoeng

• Thermal conductivity = 0.61 W / m / K, ho khothalletsa tsamaiso e nepahetseng ea mocheso.
• E thusa ho thibela mathata a ho futhumatsa sebakeng sa heno, ho ntlafatsa ts'epo ea PCB lits'ebetsong tse nang le matla a mangata.
• E loketse li-circuits tsa maqhubu a holimo, a matla a phahameng, le a amplifier ea RF moo ts'ebetso ea mocheso e leng bohlokoa.

6. Superior CAF (Conductive Anodic Filament) Resistance for Long-Term Durability

• E thibela ho thehoa ha CAF, ho fokotsa kotsi ea lifupi tsa motlakase le ho hloleha ho meralo ea PCB ea multilayer.
• E matlafatsa ts'epahalo ea nako e telele ea khokahano e phahameng ea methapo ea methapo (HDI) le li-PCB tse ngata.
• E bohlokoa bakeng sa lits'ebetso tse bohlokoa haholo sebakeng sa sefofane, likoloi, le lisebelisoa tsa elektroniki tsa bongaka, moo ts'ebetso ea nako e telele e ke keng ea buisanoa.

Melemo ea ho Sebelisa Isola I-Tera MT40 ho PCB Fabrication

✅ Ho latela RoHS le UL 94 V-0 – Ho latela RoHS ka botlalo, ho netefatsa polokeho ea tikoloho le ea batho ka ho felisa lintho tse kotsi. E netefalitsoe ho latela maemo a ho hanyetsa malakabe a UL 94 V-0, e leng se etsang hore e be khetho e tšepahalang bakeng sa lits'ebetso tse tšepahalang haholo le tsa bohlokoa bakeng sa polokeho.

✅ Ho Tsamaellana ha Ts'ebetso ea FR-4 – Ho fapana le li-laminate tse thehiloeng ho PTFE, tse hlokang ts'ebetso e khethehileng, I-Tera MT40 e lumellana ka botlalo le mekhoa e tloaelehileng ea tlhahiso ea FR-4, ho kenyeletsoa le lits'ebetso tse tloaelehileng tsa ho polata le ho lamination ka masoba, ho fokotsa mathata a tlhahiso le litšenyehelo.

✅ Tshebetso ya Lebelo le Phahameng, Tahlehelo e Tlase – E etseditswe ditshebediso tsa maqhubu a GHz, I-Tera MT40 e fokotsa ho fokotswa ha matshwao, tahlehelo ya ho kenngwa, le ho sotha, e leng se etsang hore e be ntle bakeng sa dipotoloho tsa dijithale, RF, le microwave tse lebelo le hodimo. Ntlha ya yona e tlase ya ho qhala (Df = 0.0031) e netefatsa phetiso e hlwekileng ya matshwao ka tahlehelo e nyane ya matla.

✅ Bokhoni ba Mealo e Mengata bakeng sa Meralo e Rarahaneng – E tšehetsa li-stackup tsa PCB tsa mekhahlelo e mengata ka taolo e tiileng ea impedance, e leng se etsang hore e be khetho e phethahetseng bakeng sa li-PCB tsa HDI , marang-rang a 5G, litsamaiso tsa radar le puisano ea sathelaete.

✅ Mokhoa o Mong o Sebetsang ka Theko e Tlase ho Li-Laminate tse Thehiloeng ho PTFE – E fana ka ts'ebetso e batlang e le haufi le PTFE lits'ebetsong tsa RF le tsa lebelo le phahameng ntle le liphephetso tsa tlhahiso ea thepa e thehiloeng ho PTFE. Sena se fetolela ho fokotsa litšenyehelo tsa thepa, ho sebetsa habonolo, le ho tenyetseha ha moralo ho ntlafetseng, e leng se etsang hore e be khetho ea boleng bo holimo bakeng sa meralo ea PCB ea moloko o latelang.

Likopo tsa Isola I-Tera MT40 ho High-Performance Electronics

Isola I-Tera MT40 e entsoe ka ho khetheha bakeng sa lits'ebetso tse hlokang tahlehelo ea matšoao a tlase, impedance e tsitsitseng, le ts'epo e phahameng. Lisebelisoa tsa eona tsa bohlokoa li kenyelletsa:

1. Aerospace & Defense Electronics

✦ E sebelisoa ho tsa avionics, radar, le likhokahano tsa sathelaete
✦ E mamella mocheso o feteletseng le maemo a mongobo
✦ E netefatsa phetisetso e tsitsitseng ea lets'oao la RF lits'ebetsong tse bohlokoa haholo

2. Litsamaiso tsa Thuso ea Likoloi le tse Tsoetseng Pele (ADAS)

✦ E ts'ehetsa radar ea likoloi (77 GHz), LiDAR, le puisano ea V2X
✦ E fana ka botsitso ba mocheso bakeng sa tikoloho e thata ea likoloi
✦ E fokotsa tahlehelo ea matšoao phetisong ea data e phahameng haholo

3. Litsi tsa Marang-rang le Litsi tsa Boitsebiso

✦ E bohlokoa bakeng sa liteishene tsa 5G, li-routers tsa lebelo le holimo le li-switch tsa Ethernet
✦ E tšehetsa PCIe Gen5, DDR5, le lifofane tse ka morao tse lebelo le holimo
✦ E netefatsa tahlehelo e tlase ea ho kenya, ho ntlafatsa katleho ea marang-rang

4. RF & Microwave Communications Systems

✦ E loketse litsamaiso tsa satellite, puisano ea seea-le-moea, le li-module tsa RF tse ka pele
✦ E fana ka Df e tlase, e netefatsa ho khopama ho fokolang ha lets'oao
✦ E sebelisoa ka har'a li-antenna le li-amplifiers tsa matla tsa RF

5. Sets'oants'o sa Bongaka & Lisebelisoa tsa Tlhahlobo

✦ E fumaneha ka har'a li-scanner tsa MRI, mechini ea ultrasound, le lisebelisoa tse kenngoeng
✦ E fana ka ts'ebetso e tsitsitseng ea dielectric bakeng sa phetiso e nepahetseng ea matšoao
✦ E lumellana le litekanyetso tsa boleng ba bongaka

6. Computing, Storage, & High-Performance Servers

✦ E ts'ehetsa lits'ebetso tsa komporo e potlakileng haholo, ho kenyeletsoa AI, cloud computing, le ho sebetsa ka bohale.
✦ E sebelisoa lihokelong tsa lebelo le holimo, li-FPGA, le meralo ea PCB ea maqhubu a holimo.
✦ E fokotsa ho senyeha ha lets'oao ho li-PCB tse ngata tse rarahaneng

Hobaneng u Khetha Highleap Electronics bakeng sa Complex, High-Layer PCBs?

Ho rala li-PCB tsa maqhubu a holimo, tse lebelo le holimo le tse hlokang mocheso ho hloka boenjiniere bo nepahetseng le bokhoni bo tsoetseng pele ba tlhahiso. Ho Highleap Electronics, re sebetsa ka thata ho etsa li-PCB tse thata, tse nang le matla a holimo tse nang le taolo e thata, tahlehelo e fokolang ea mats'oao, le ts'epahalo e phahameng - e bohlokoa haholo bakeng sa lits'ebetso tsa 5G, sebaka sa sefofane, litsing tsa data, RF, le komporo e sebetsang hantle haholo.

Re sebetsa le mefuta e mengata ea lisebelisoa tsa PCB tse sebetsang hantle , ho kenyeletsoa Isola I-Tera MT40, ho netefatsa hore meralo ea hau e fihlela maemo a holimo a indasteri. Hore na projeke ea hau e hloka li-laminate tse lahleheloang haholo, li-stackup tsa PCB tse potlakileng haholo, kapa litharollo tsa thepa e kopantsoeng, boiphihlelo ba rona bo tiisa ts'ebetso e phethahetseng ho tloha tlhahisong ea prototype ho isa tlhahisong e kholo.

Ke Hobane'ng ha U phahamisa Electronics?

✔ Litsebi tsa High-Layer & Complex PCBs - E ipapisitse le meralo ea multilayer, HDI, le hybrid stackup bakeng sa lisebelisoa tsa elektroniki tsa moloko o latelang.
✔ Taolo ea Impedans ea Impedans ea Indasteri - Ho netefatsa botšepehi ba matšoao ka khetho e nepahetseng ea Dk/Df, etching e laoloang, le netefatso ea TDR.
✔ Tšebelisano e Tsoetseng Pele ea Lintho – Ho tšehetsa Isola, laminate e khethehileng e nang le tahlehelo e tlase, Panasonic Megtron, le li-laminate tse ling tse nang le maqhubu a phahameng bakeng sa ts'ebetso e ntle ka ho fetisisa.
✔ Scalable Production Solutions - Ho tloha ho li-prototypes tse potlakileng ho ea ho tlhahiso ea boleng bo phahameng, ho fana ka boleng bo tsitsitseng le ts'ebetso.
✔ Tšehetso e Felletseng ea Boenjiniere - Tataiso ea DFM (Design for Manufacturability), papiso ea RF, le ts'ebetso ea tloaelo ea ho bokella likopo tse hlokahalang.

Ikopanye le rona hona joale ho buisana ka litlhoko tsa hau tse rarahaneng tsa PCB kapa u kope qotso hanghang bakeng sa projeke ea hau e latelang!

Ha tlhoko ea litefiso tse phahameng tsa data, tahlehelo ea matšoao a tlase, le botsitso bo phahameng ba mocheso bo eketseha, Isola I-Tera MT40 e ntse e le khetho e etelletseng pele bakeng sa meralo e tsoetseng pele ea PCB. Hore na o sebetsa ho lisebelisoa tsa 5G, litsamaiso tsa sefofane, kapa lisebelisoa tsa elektroniki tsa likoloi, thepa ena e fana ka ts'ebetso e ke keng ea lekanngoa le ho ts'epahala.

Haeba u batla setsebi sa ho etsa PCB se sebelisang Isola I-Tera MT40, Highleap Electronics ke molekane oa hau eo u mo tšepang. Ha re theheng li-PCB tse sebetsang hantle, tse laoloang ke impedance hammoho! 

LBH

1. Isola I-Tera MT40 e bapisoa joang le PTFE laminates bakeng sa meralo ea li-antenna tsa 5G?
Leha di-laminate tsa PTFE (mohlala, laminate e ikhethang e nang le tahlehelo e tlase) di ipabola haholo ditshebedisong tsa RF tse nang le tahlehelo e tlase haholo, Isola I-Tera MT40 e fana ka tshebetso e tshwanang ya Dr/Df (Dk=3.45±0.05, Df=0.0031) ka ho tsamaellana ha tshebetso ya FR-4. Sena se fokotsa ditjeo tsa tlhahiso ka 15–20% mme se fedisa tsamaiso e ikgethang, e leng se etsang hore e be e loketseng di-antenna tsa 5G tse nang le ditjeo tse hlokang tshebetso ya ≤28 GHz.

2. Na I-Tera MT40 e ka tšehetsa li-stackups tse tsoakiloeng ka FR-4 e tloaelehileng?
Ee. Li-stackups tsa Hybrid tse kopanyang I-Tera MT40 (bakeng sa likarolo tsa matšoao a lebelo le phahameng) le FR-4 (bakeng sa lifofane tsa matla / fatše) li tloaelehile. Highleap e sebelisa lipapiso tsa khatello ea mocheso ho netefatsa hore CTE e lumellana le ho thibela delamination nakong ea lamination. Mohlala, PCB ea radara ea makoloi e mekato e 12 e ka sebelisa MT40 ho Layer 1–4 (77 GHz RF) le FR-4 ho Layer 5–12 (kabo ea matla).

3. Ke eng e etsang hore I-Tera MT40 e lokele li-amplifiers tsa RF tse matla?
Thermal conductivity ea eona (0.61 W/m/K) le Td=360°C e thusa ho qhala mocheso o sebetsang hantle lipotolohong tsa motlakase tsa RF tse thehiloeng ho GaN/SiC. Ho fapana le PTFE, ho kenngoa ha mongobo o tlaase oa MT40 (0.1%) ho thibela ho ruruha ha dielectric tlas'a maqhubu a matla a matla, ho netefatsa hore ho na le impedance e tsitsitseng ho 6G backhaul amplifiers.

4. I-Tera MT40 e sebetsana joang le ho hlōleha ha CAF libakeng tse mongobo?
Khanyetso ea CAF ea laminate e netefalitsoe ho latela IPC TM-650 2.6.25, ntle le kholo ea likhoele e bonoang kamora lihora tse 1,000 ho 85 ° C/85% RH. Sena se bohlokoa bakeng sa li-PCB tsa sepakapaka tse pepesehileng ho condensation le lisebelisoa tsa bongaka tse hlokang ho thibela metsi ka mouoane.

5. Na I-Tera MT40 e lumellana le mekhoa ea ho kopanya ntle le loto?
Ee. Ka Tg=200°C le T288=60 metsotso, e mamella lipotoloho tse ngata tse se nang loto (tlhōrō ea 260°C) ntle le ho phatloha. Highleap e e kopanya le ENIG sephetho sa bokaholimo ho thibela ho phahamisa liphahlo likopanong tsa likoloi tsa ECU.

6. Ke litifikeiti life tse tšehetsang tšebeliso ea I-Tera MT40 litsamaisong tsa bohlokoa tsa polokeho?
Thepa ke UL 94 V-0 e netefalitsoeng bakeng sa ho hanyetsa lelakabe le ho latela RoHS. Bakeng sa lits'ebetso tsa bongaka, e kopana le litlhoko tsa ts'ebetso ea ISO 13485, ha ts'ebetso ea eona e tlase ea khase e tsamaellanang le maemo a NASA/ESA bakeng sa lisebelisoa tsa elektroniki tsa sathelaete.