Your PCB Manufacturing Expert – Highleap Electronic

IT-958G PCB for High Speed Servers and Backplanes

IT-958G PCB for High Speed Servers and Backplanes

IT-958G multilayer PCB examples for server and high-speed interconnect applications.For a server backplane or high-speed networking board, choosing a low-loss laminate is only the start: insertion loss also depends on copper profile, trace geometry, vias, connectors...

IT-968GSE PCB for High-Speed Networking

IT-968GSE PCB for High-Speed Networking

IT-968GSE PCB illustration for ultra-low-loss switch and telecom board planning.400G-class switch cards and high-speed telecom boards can be sensitive to small differences in dielectric constant, copper roughness and via transitions. IT-968GSE is an ultra-low-loss...

Building IT-602G HDI Boards for SSDs and Memory Modules

Building IT-602G HDI Boards for SSDs and Memory Modules

IT-602G PCB examples for HDI, SSD and memory-module applications.An IT-602G PCB is typically considered when an HDI or memory-module design needs a halogen-free, high-Tg laminate with low dielectric loss and controlled Z-axis expansion. Those properties are relevant...

IT-988GL Backplane PCBs with Low-CTE Process Control

IT-988GL Backplane PCBs with Low-CTE Process Control

IT-988GL multilayer PCB manufacturing illustration.Long-reach backplanes and high-speed switch boards place simultaneous demands on dielectric loss, dimensional stability and mechanical interfaces such as press-fit connectors and large BGAs. IT-988GL is an ITEQ...

Arlon 85NT PCB: Polyimide Fabrication and SMT Control

Arlon 85NT PCB: Polyimide Fabrication and SMT Control

PCB manufacturing illustration; material grade and construction are confirmed in the project specification.A high-temperature polyimide PCB laminate with nonwoven aramid reinforcement is used when thermal stability and low in-plane expansion are both important. Arlon...

High-Quality Arlon 33N PCB Manufacturing

High-Quality Arlon 33N PCB Manufacturing

PCB manufacturing illustration. Confirm the specified Arlon material grade through the project documentation and material traceability.An Arlon 33N PCB is usually specified because a design needs both a polyimide thermal-performance profile and a clearly defined...

Arlon 35N PCB Manufacturing and Polyimide Lamination

Arlon 35N PCB Manufacturing and Polyimide Lamination

PCB manufacturing illustration. Confirm the specified Arlon material grade through the project documentation and material traceability.Arlon 35N PCB fabrication is a process-window problem: how to produce a repeatable polyimide multilayer through material preparation,...

Low-CTE Arlon 45NK PCB Fabrication in China

Low-CTE Arlon 45NK PCB Fabrication in China

PCB manufacturing illustration. Confirm the specified Arlon material grade through the project documentation and material traceability.Arlon 45NK PCB design is about controlling expansion mismatch at the solder-joint interface, while preserving manufacturable...

Arlon 85NT PCB: Polyimide Fabrication and SMT Control

Arlon 85HP PCB Manufacturing Services in China

PCB manufacturing illustration. Confirm the specified Arlon material grade through the project documentation and material traceability.Arlon 85HP PCB manufacturing is most relevant when a thick, high-layer-count or thermally stressed board needs careful control of...

Arlon 86HP HDI PCB Manufacturing

Arlon 86HP HDI PCB Manufacturing

PCB manufacturing illustration. Confirm the specified Arlon material grade through the project documentation and material traceability.Arlon 86HP PCB fabrication is primarily a stack-up and interconnect-reliability decision, not a request for a high-Tg material by...