Your PCB Manufacturing Expert – Highleap Electronic
Table of contentsRF Transceiver PCB Manufacturing and Assembly Within a Full-Service PCB FactoryRF Transceiver PCB Design Guidelines for Low-Loss TX and RX PerformanceControlled-Impedance RF Transceiver PCB Stackup and Material Selection50-Ohm RF Routing, Grounding,...
Table of contentsReference RFSOC Board Project: 115 × 175 mm, 100G Optical, and NVMe 4.0Why RFSOC Board Manufacturing Is More Demanding Than Standard Digital PCB ProductionHigh-Speed RFSOC Board PCB Fabrication PrioritiesManufacturing Considerations for the 100G...
IS680 is considered when a commercial RF board needs lower loss than ordinary FR-4 but the cost and processing complexity of a conventional PTFE construction are difficult to justify. The family is offered in multiple dielectric-constant grades, so the first...
A 76–81 GHz automotive radar PCB is an electromagnetic structure, a mechanical datum, and a manufacturing process at the same time. The patch array, feed network, RFIC launch, ground fence, shield cavity, radome spacing, copper profile, dielectric thickness, and...
Figure 1. Isola Astra MT77 PCB ManufacturingIsola Astra MT77 PCB manufacturing is often used for RF, microwave and mmWave products where the RF board must work together with digital, power or interconnect boards in the same system. Highleap Electronics supports Astra...
As RF hardware becomes smaller and more integrated, engineers face a familiar problem: the enclosure keeps shrinking, but resonant structures such as patch antennas, couplers, filters, and matching sections still consume valuable board area. At that point,...
When designing microwave applications, phased-array antennas, and low-noise receiver channels, hardware engineers require a substrate that delivers ultra-low loss and exceptional phase stability. Arlon 25N is a premier woven glass-reinforced, cross-linked thermoset...
When engineering microwave filters, power amplifiers, and phased array antenna feed networks, hardware teams face a strict signal integrity budget. Conventional FR-4 laminates introduce unacceptable insertion loss and phase shifting at elevated frequencies. To...
Finding a reliable supplier for high-frequency RF boards is a major challenge for hardware procurement teams. Taconic CER-10, with its extreme dielectric constant of 10.0, is essential for miniaturizing microwave components like patch antennas and power dividers....
When routing layouts for phased array antennas, aerospace telemetry, and microwave radar systems, engineers specify woven-glass reinforced PTFE laminates to minimize dielectric loss. Taconic TLX-8 is a premier substrate for these applications, offering mechanical...